How to use the HMC Commandline

This documents contains the most important HMC commands. It covers both, the old power4 commands (up to HMC Version 3) and the new power5 style commands (HMC Version 4-6). A lot of nice commands still available for version 3 (power4) are removed from newer releases. One example of these nice commands is lslparsand it's not available for HMC version 4 and higher. The real reason behind it is that IBM wants to force us to use the web based tools wsm and WebSM or the new HMC browser GUI. This documents helps you to survive with the HMC commands in case working with the web based tools is not feasible.

In the examples below we call a whole power4 or power5 frame (aka Managed System) pserver. We call an LPAR mylpar. If an example output shows more than one LPAR name we enumerate it. LPAR Profiles are shown as myprofile. You have to replace these names with your object names.

If you use power6 systems, you need the new HMC version7. Although the GUI has changed from wsm to a browser based service, the commandline remains compatible. You can just use the power5 examples for power6 and power7. However, additional features have been implemented.

HMC Management

LPAR Management: Status Information

LPAR Management: Operations

LPAR Configuation

Operations in an virtualized environment

HMC Management

1. HMC Version

hscroot@hmc> lshmc -V

 Version: 3

 Release: 3.2

HMC Build level 20040827.1

power4 HMCs could never show a version higher 3.x - HMC version 4.x and higher are only for power5 systems. Power6 systems need HMCs version 7.x.

2. Network configuration of the HMC

hscroot@hmc> lshmc -n

3. Reboot the HMC

power4 + power5/6/7:

hscroot@hmc> hmcshutdown -t now -r

4. How to change the HMC password (of user hscroot)

power4 + power5/6/7:

hscroot@hmc> chhmcusr -u hscroot -t passwd

Enter the new password:

Retype the new password:

5. Show Available Filesystem Space

power5/6/7:

hscroot@hmc> monhmc -r disk -n 0

Filesystem           1K-blocks      Used Available Use% Mounted on

/dev/sda2             16121184   4958484  10343788  33% /

udev                    517300       156    517144   1% /dev

/dev/sda3              6040320   1341736   4391744  24% /var

/dev/sda7              8056524    154132   7493140   3% /dump

/dev/sda8             38669964    203056  36502564   1% /extra

It's just the same as you would expect from the UNIX command df.

LPAR Management: Status Information

1. LPAR Status

That's how you get an overview of all systems controlled by your HMC:

power4:

hscroot@hmc> lslpars

power5/6/7:

hscroot@hmc> lssyscfg -r sys -F name:serial_num:state

pserver1:656D24A:Operating

pserver2:656FFFF:Operating

The format string 'lpar_id:name:serial_num:state' also tells you the serial number of the systems. You can omit the field 'serial_num' if you don't need to know.
However, for every system from the list above you get the LPAR overview as shown below:

hscroot@hmc> lssyscfg -m pserver -r lpar -F name:state

Example:

hscroot@hmc> lssyscfg -m pserver1 -r lpar -F name:state

mylpar1:Running

mylpar2:Running

mylpar3:Not Activated

Don't know where to start? Find the managed system to an LPAR with a query:

hscroot@hmc> for m in $(lssyscfg -r sys -F name); do echo $m ; lssyscfg -r lpar -m $m -F name:state ; done

2. Show Status and LED/LCD Display of an LPAR

power4:

hscroot@hmc> lssyscfg -r lpar -m pserver -n mylpar

power5/6/7:

hscroot@hmc> lsrefcode -m pserver -r lpar --filter "lpar_names=mylpar" -F lpar_name:refcode

You can even see the history of LED codes. Just use -n for the last NUM codes. For example, if you want to see the last 5 LED codes of an LPAR type

hscroot@hmc> lsrefcode -m pserver -r lpar --filter "lpar_names=mylpar"  -n 5 -F lpar_name:refcode

mylpar:

mylpar:0c33

mylpar:

mylpar:0539

mylpar:0538

... and for the status LEDs:

hscroot@hmc> lsled -m pserver -r sa -t virtuallpar --filter ""lpar_names=mylpar""

3. Show Status and LED/LCD Display of a Systems Running in FullPartitionMode

power4:

hscroot@hmc> lssyscfg -r sys -n pserver

4. Overview LPAR IDs

power5/6/7:

hscroot@hmc> lssyscfg -r lpar -m pserver -F lpar_id:name:serial_num:state | sort -n

1:vioserver1:Running

2:vioserver2:Running

3:mylpar1:Not Activated

4:mylpar2:Running

5:mylpar3:Running

6:mylpar4:Running

7:mylpar5:Running

8:mylpar6:Running

9:mylpar7:Running

10:mylpar8:Not Activated

5. Overview Connection State

Are all service processors connected to my HMC?

power5/6/7:

hscroot@hmc> lssysconn -r all -F type_model_serial_num:ipaddr:state | sort

9117-570*65AE18C:172.16.255.253:Connected

9117-570*65AE18C:172.16.254.255:Connected

9117-570*65AE2AC:172.16.255.254:Connected

9117-570*65AE2AC:172.16.254.254:Connected

9117-570*650D70D:172.16.255.252:Connected

9117-570*650D70D:172.16.253.255:Connected

9117-570*650D71D:172.16.254.253:Connected

9117-570*650D71D:172.16.255.251:Connected

9131-52A*065F7BB:172.16.253.254:Connected

9131-52A*065F8BA:172.16.254.252:Connected

The link to the name of the managed system is the serial number - not the IP address! The IP addresses listed above are mounted on the service processor's private NIC and managed by the integrated DHCP server of the HMC.

6. Show a List of All I/O Adapters

The command below will show a list of all adapters physically plugged into a Managed System:

power5/6/7:

hscroot@hmc> lshwres -r io -m pserver --rsubtype slot --filter -F lpar_name:drc_name:description

null:U78C0.001.DBJC357-P2-C8-T5:Universal Serial Bus UHC Spec

mylpar1:U78C0.001.DBJC357-P2-C1:Fibre Channel Serial Bus

null:U78C0.001.DBJC357-P2-C2:Fibre Channel Serial Bus

vios2:U78C0.001.DBJC357-P2-T3:RAID Controller

vios2:U78C0.001.DBJC357-P2-C8-T7:Generic XT-Compatable Serial Controller

vios2:U78C0.001.DBJC357-P2-C5:Fibre Channel Serial Bus

vios2:U78C0.001.DBJC357-P2-C6:Ethernet controller

vios2:U78C0.001.DBJC357-P2-C9-T2:PCI-E SAS Controller

vios2:U78C0.001.DBJC357-P2-C9-T1:PCI-E SAS Controller

null:U78C0.001.DBJC373-P2-C8-T5:Universal Serial Bus UHC Spec

mylpar1:U78C0.001.DBJC373-P2-C1:Fibre Channel Serial Bus

null:U78C0.001.DBJC373-P2-C2:Fibre Channel Serial Bus

vios1:U78C0.001.DBJC373-P2-T3:RAID Controller

vios1:U78C0.001.DBJC373-P2-C8-T7:Generic XT-Compatable Serial Controller

vios1:U78C0.001.DBJC373-P2-C5:Fibre Channel Serial Bus

vios1:U78C0.001.DBJC373-P2-C6:Ethernet controller

vios1:U78C0.001.DBJC373-P2-C9-T2:PCI-E SAS Controller

vios1:U78C0.001.DBJC373-P2-C9-T1:PCI-E SAS Controller

A leading "none" indicates that the adapter is not assigned to an LPAR. To show a list of all I/O adapters owned by a specific LPAR use the "--filter" modifier:

power5/6/7:

hscroot@hmc> lshwres -r io -m pserver --rsubtype slot -F lpar_name:drc_name:description --filter "lpar_names=mylpar1"

mylpar1:U78C0.001.DBJC357-P2-C1:Fibre Channel Serial Bus

mylpar1:U78C0.001.DBJC373-P2-C1:Fibre Channel Serial Bus

7. Overview DLPAR status

power5/6/7:

hscroot@hmc> lspartition -dlpar

<#0> Partition:<6 111.111.15.66="" mylpar1.unixwerk.de="">

       Active:<0>, OS:, DCaps:<0x0>, CmdCaps:<0x0 0x0="">, PinnedMem:<512>

<#1> Partition:<2 111.111.15.65="" vios1.unixwerk.de="">

       Active:<1>, OS:, DCaps:<0x4f9f>, CmdCaps:<0x1b 0x1b="">, PinnedMem:<520>

<#2> Partition:<1 111.111.15.64="" vios2.unixwerk.de="">

       Active:<1>, OS:, DCaps:<0x4f9f>, CmdCaps:<0x1b 0x1b="">, PinnedMem:<518>

<#3> Partition:<3 111.111.226.4="" mylpar2.unixwerk.de="">

       Active:<1>, OS:, DCaps:<0x2f>, CmdCaps:<0xb 0xb="">, PinnedMem:<1707>

<#4> Partition:<1 111.111.226.2="" mylpar3.unixwerk.de="">

       Active:<1>, OS:, DCaps:<0x2f>, CmdCaps:<0xb 0xb="">, PinnedMem:<884>

<#5> Partition:<1 111.111.0.26="" mylpar7.unixwerk.de="">

       Active:<1>, OS:, DCaps:<0x2f>, CmdCaps:<0xb 0xb="">, PinnedMem:<406>

<#6> Partition:<4 111.111.226.5="" mylpar4.unixwerk.de="">

       Active:<1>, OS:, DCaps:<0x2f>, CmdCaps:<0xb 0xb="">, PinnedMem:<967>

A value <1> for Active: should be fine.

LPAR Management: Operations

1. Soft Reset of an LPAR

power4:

hscroot@hmc> chsysstate -m pserver -r lpar -n mylpar -o reset

power5/6/7:

hscroot@hmc> chsysstate -r lpar -m pserver -o shutdown -n mylpar

2. Soft Reset of a System Running in FullPartitionMode

power4:

hscroot@hmc> chsysstate -n pserver -r sys -o reset

3. Hard Reset of an LPAR

power4:

hscroot@hmc> chsysstate -m pserver -r lpar -n mylpar -o off

power5/6/7:

hscroot@hmc> chsysstate -r lpar -m pseries -o shutdown -n mylpar --immed

4. Hard Reset of a System Running in FullPartitionMode

power4:

hscroot@hmc> chsysstate -n pserver -r sys -o off

5. Virtual Console

That's how you get a connection to an LPAR's serial console:

power4 + power5/6/7:

hscroot@hmc> mkvterm -m pserver -p mylpar

If your system is running in FullSystemPartition-Mode you connect with a command like this:

power4:

hscroot@hmc> mkvterm -m pserver

You can escape from the console connection by typing ~~. (twice tilde followed by a dot)

If you cannot connect to the serial console and you get an error message instead:

All available virtual terminal sessions have been opened and are in use.

To force a new open session, perform a Close Terminal Session operation

which frees up the session.

there is still another active connection to this console. You can close this connection with:

power4 + power5/6/7:

hscroot@hmc> rmvterm -m pserver -p mylpar

If you're not sure which managed system belongs to an LPAR you could walk through the vtmenu:

hscroot@hmc> vtmenu

 Retrieving name of managed system(s) . . .

 ----------------------------------------------------------

  Managed Systems:

 ----------------------------------------------------------

   1) pserver1

   2) pserver2

   3) pserver3

 Enter Number of Managed System.   (q to quit): 1

 ----------------------------------------------------------

  Partitions On Managed System:  pserver1

 ----------------------------------------------------------

   1)    mylpar1                              Running

   2)    mylpar2                              Running

   3)    mylpar3                              Running

   4)    mylpar4                              Running

   5)    mylpar5                              Running

 Enter Number of Running Partition (q to quit):

Just enter a number and you will be connected to the console of the corresponding LPAR.

6. Activation of an LPAR

power4:

hscroot@hmc> chsysstate -r lpar -m pserver -o on [ -f myprofile ] -n mylpar

power5/6/7:

hscroot@hmc> chsysstate -r lpar -m pserver -o on -f myprofile -n mylpar

7. How to Boot an LPAR into SMS Menu

power4:

You have to create an additional profile. In this profile set the boot mode to 'sms'. We call the profile mysmsprofile. Then start the LPAR with this profile:

hscroot@hmc> chsysstate -r lpar -m pserver -o on -f mysmsprofile -n mylpar

power5/6/7:

With new HMCs a special profile is not any longer needed. The profile's boot mode can be overwirtten with -b:

hscroot@hmc> chsysstate -r lpar -m pserver -o on -f myprofile -b sms -n mylpar

The same way the LPAR can be bootet into the Open Firmware prompt (Bootmode: 'of'):

hscroot@hmc> chsysstate -r lpar -m pserver -o on -f myprofile -b of -n mylpar

8. How to Power on a System Running in FullPartitionMode

power4:

hscroot@hmc> chsysstate -o on -r sys -n pserver -c full

9. Bring the key switch to position NORMAL

This might be necessary on some power5 HMCs when an LPAR does not properly boot after issuing the power on command above. You might see a message like this:

0514-440 cfgcon: failed to create log file: check path name, permissions, and available space

When seeing this you can only access diag mode or boot the LPAR in singleuser mode. This command sets the key switch back to normal position:

power5/6/7:

hscroot@hmc> chsysstate -r lpar -o chkey -k norm -n mylpar -m pserver

LPAR Configuration

1. Change an LPAR's Name

Let's say we have these five LPARs defined on a managed system:

hscroot@hmc> lssyscfg -r lpar -m pserver -F lpar_id:name:state

1:vios1:Running

2:vios2:Running

3:barney:Running

4:mylpar2:Running

5:mylpar3:Running

Now we want to change the name of LPAR 3 from barney to mylpar1:

power5/6/7:

hscroot@hmc> chsyscfg -r lpar -m pserver -i "name=barney,new_name=mylpar1"

We check and see that the name of LPAR 3 indeed has changed to mylpar1:

hscroot@hmc> lssyscfg -r lpar -m pserver -F lpar_id:name:state

1:vios1:Running

2:vios2:Running

3:mylpar1:Running

4:mylpar2:Running

5:mylpar3:Running

2. Rename a Managed System

This would change the name of the manages system pserver to pserver1:

power5/6/7:

hscroot@hmc> chsyscfg -r sys -m pserver -i "new_name=pserver1"

3. DLPAR: Increase the Number of Processing Units of an LPAR

To assign 8 additonal processing units to an LPAR run the following command:

power5/6/7:

hscroot@hmc> chhwres -r proc -m pserver -o a -p mylpar --procunits 8

Operationen in einer virtualisierten Umgebung

HMC Version 7 can run operations on Virtual I/O Servers.

1. Make virtual WWPNs visible to the SAN

The below command would login all virtual adapters of the LPAR with ID 12 to the SAN:

HMC Version 7

hscroot@hmc> chnportlogin -o login -m pserver --id 12

2. Show all virtual WWPNs assigned to an LPAR

e.g. for an LPAR with ID 12, type

HMC Version 7

hscroot@hmc> lsnportlogin -m pserver --filter "lpar_ids=12"

lpar_name=mylpar,lpar_id=12,profile_name=default,slot_num=51,wwpn=c050726660a0002c,wwpn_status=1,logged_in=vios,wwpn_status_reason=null

lpar_name=mylpar,lpar_id=12,profile_name=default,slot_num=51,wwpn=c050726660a0002d,wwpn_status=1,logged_in=vios,wwpn_status_reason=null

lpar_name=mylpar,lpar_id=12,profile_name=default,slot_num=52,wwpn=c050726660a0002e,wwpn_status=1,logged_in=vios,wwpn_status_reason=null

lpar_name=mylpar,lpar_id=12,profile_name=default,slot_num=52,wwpn=c050726660a0002f,wwpn_status=1,logged_in=vios,wwpn_status_reason=null

You can also list the status of more than one LPAR in one go:

HMC Version 7

hscroot@hmc> lsnportlogin -m pserver --filter "\"lpar_ids=12,13\""

3. Logout virtual WWPNs from the SAN

HMC Version 7

hscroot@hmc> chnportlogin -o logout -m pserver --id 12

Tanti Technology

Tuesday, 22 October 2013